internal tooth
英 [ɪnˈtɜːnl tuːθ]
美 [ɪnˈtɜːrnl tuːθ]
网络 内齿
双语例句
- Swing Movable Tooth Drive Mechanism with Double External ( Double Internal) Tooth Profile
双外齿廓（双内齿廓）摆动活齿传动机构 - Design of cold extrusion die for axle sleeve with internal saw tooth;
本文提出对大模数花键成形采用冷挤压加工工艺。 - Strength Analysis of Internal Tooth Ring Plate in the Two-class Three-ring Gear Reducer Based on ANSYS
基于ANSYS的二级三环减速器内齿环板的强度分析上置式双级主减速器 - The Clinical Observation on Mixed Hemorrhoid of Horizontal Form Suturing Internal Hemorrhoid and Resection External Hemorrhoid and Retain Tooth Line
内痔横形缝扎外痔切除保留齿线术治疗混合痔的疗效观察 - To determine the tooth thickness taper of evolute internal spline taper spindle in tooth, theoretically, it is necessary to check the tooth shape locating taper spindle and the locating precision after the workpiece is mounted, as well as design the evolute taper spindle.
确定渐开线花键锥度芯轴在齿向的齿厚锥度，理论上必须验证齿形定位锥度芯轴与工件装配固定后的定位精度，设计渐开线锥度芯轴。 - Strength calculation for internal meshed gear with few tooth number difference
少齿数差内啮合齿轮的强度计算 - Study on Dynamical Characteristic of Epicyclic Gear Drive with Internal Tooth
内齿行星齿轮传动动态特性的研究 - Theoretical Study on Internal Gear Honing and Analysis of Computer Simulating Gear Tooth Contact
内啮合珩齿的理论研究和微机模拟齿面接触分析 - Calculation about the contact ratio and the load correction factor of the internal gear transmission(ⅰ) ── calculation about the backlash of the tooth profiles
齿轮内啮合传动的重合度及载荷修正系数的计算（Ⅰ）&齿侧间隙的计算 - On the basis of production, a series of process indicate that the lifespan of flat is mainly determined by internal structure, tooth shape processing and the quality of heat treatment.
在生产实践的基础上，通过一系列工艺表明搓丝板的内部组织，齿形加工及热处理质量对其寿命起决定性作用。 - The Internal Tooth Profile Equation of Living Tooth Drive Reducer
活齿减速器中心轮齿形方程的求解与分析 - Selection of the Design Parameters on Planetary Transmission Using Internal Involute Gear Pair with Small Tooth Difference
渐开线少齿差传动设计参数的选择 - An objection is raised in the paper to the simultaneous solution and the supplement of the differential iteration which are brought forth in the article "Calculation of Addendum Modification of Internal Gear Pair with Minor Difference in Tooth Number".
本文对《少齿差内啮合齿轮变位系数的计算》一文所提出的联立求解法和对微分逼近法的改进提出了异议。 - Conclusion: This phenomenon is of reversible and inevitable optical nature because of the light transmission of the free gingiva and the existence of metal base crown which blocks the lights from the internal tooth structure and darkens the root.
结论：由于游离龈的光透过性及金属基底冠对牙根的阻光作用，基牙游离龈变色是一种不可避免的可逆光学现象。 - According to the tooth thickness taper of evolute internal spline taper spindle in tooth, calculate the tailstock block-up thickness of the gear grinding machine, determine the grinding wheel angle of the gear grinding machine, and process the evolute taper spindle.
根据渐开线花键锥度芯轴在齿向的齿厚锥度计算磨齿机尾架垫高厚度，确定磨齿机砂轮角度，加工出渐开线锥度芯轴。 - The QX straight conjugate internal gear pump is a new type of hydraulically driving element. The calculation of tooth profile, the limiting point of meshing, the designing process of slotting cutter were introduced.
介绍了一种新型液压动力元件&QX型直线共轭内啮合齿轮泵的齿廓曲线计算、专用插齿刀具设计方法，分析了齿廓啮合极限点。 - When changing and processing spiral shell's bevel gear, it is necessary to use evolute internal spline tooth shape locating taper spindle for backing processing, so as to meet different spindle precision requirements of evolute internal spline reference circle, bearing fit circle and gear pitch circle.
螺伞齿轮更换加工过程中，需使用渐开线内花键齿形定位锥度芯轴支承加工，才能达到渐开线内花键分度圆与轴承配合圆及齿轮节圆同轴精度要求。 - Based on the analysis of the working principle of arc-cycloidal gear pump and the motion relationships parametric equation of a kind of cycloidal curve ot internal tooth was put forward, the trouble of processing and mapping when the rear damaged was solved.
对圆弧-摆线齿廓转子泵工作原理及运动关系进行分析的基础上.提出一种内转子摆线齿廓曲线的参数方程，解决了内转子加工以及损坏后难于测绘的难题。 - This paper is based on FEM elastic contact theory, a analysis computing method is proposed on internal gearing with small teeth difference to describe the teeth load sharing and tooth surface load distribution.
本文以有限元弹性接触分析理论为基础，提出了一种对少齿差内齿轮副啮合过程中齿间载荷分配、齿面载荷分布的分析计算方法； - In order to fill in the internal gaps, this article develops not only an available scheme of the new construction with correct mechanism, but also a modi-fication manner for tooth profile on cycloid disk to obtain new and perfect tooth profile.
为了填补国内空白，本文不仅提出了一种机理正确、切实可行的新结构方案，还提出了一种获得新颖、理想齿形的摆线轮齿形修正方法。 - The new calculation method can be regarded as a commonly used method for strength calculation of internal meshed gears with few tooth number difference, in order to reduce the volume of driving device and avoid waste cause by the existence of excessive margin of gear strength.
新的计算方法可以作为少齿数差内啮合齿轮强度计算的通用方法，以缩小传动装置的体积，避免齿轮强度存在过大裕量而造成浪费。 - A systemic analysis has been made for meshing properties of the straight conjugating internal gear pair in this paper, involving the solution of conjugated tooth profile, meshing process and line of action, as well as the influences of gear designing parameters on the contact ratio.
对直线共轭内啮合齿轮副的啮合特性进行了全面分析，包括共轭齿形的求解、啮合过程分析和重合度计算及齿轮参数对重合度的影响等内容。 - Analyses the internal gear tooth profile by using conjugate outline's meshing theory.
利用共轭齿廓的啮合理论对内齿轮进行了齿形分析。 - As the gap of teeth of internal matins gears with small tooth number difference is small, several teeth will mate simultaneously after the teeth are deformed by load.
渐开线少齿差齿轮副，由于是内啮合，齿轮副的齿对之间的间隙很小，在受力后轮齿变形而使得同时有多对齿啮合。 - Research of Internal Gear Pumps Tooth Shape Interference
内啮合齿轮泵齿形干涉的研究 - The Discussion on Two Main Restricting Conditions of Planetary Transmission Using Involute Internal Gears with Small Tooth Difference
关于渐开线少齿差传动两个主要限制条件的讨论 - Internal parallel moving gears transmission is a special kind of planetary gear train with a small tooth difference, the mechanism was developed on the basis of the principle of parallel crank and the theory of planetary transmission.
内平动齿轮传动是一种特殊形式的少齿差行星齿轮传动，它是在平行曲柄机构原理和行星传动理论基础上开发的一种新型传动方式。 - Treatment group use horizontal form suturing internal hemorrhoid and resection external hemorrhoid and retain tooth line surgery, the control group use External Dissection and Internal Ligation technique ( Milligan-Morgan operation).
治疗组采用内痔横形缝扎外痔切除保留齿线术，对照组采用传统的外剥内扎术（Milligan-Morgan术）。 - A study system about the cycloid pump is almost finished in this dissertation, which can provide the theoretical basis for the manufacture and further research of the internal cycloid pump with multiple tooth difference.
论文基本形成了一套较为系统的研究体系，能够为多齿差内啮合摆线泵的设计制造及进一步研究提供一定的理论依据。